Other options are recommended!Regards,Ahmed.
Modem Infinitum Technicolor Tg582n Manual User There seems to be Openwrt support for TG582n but sadly it's a fairly complicated process for beginners at this time!In short, it is not a good idea to bridge the two routers via WDS mode. And use WDS- replace one of the routers with a Universal Wireless Repeater- try third party/custom firmware as it may allow extra options and tweaks including repeater function.
Hello!Wireless bridge can be set up via WDS mode! However, WDS varies from vendor to vendor and is often incompatible between different routers from different vendors.Specifically, in this case, one issue is that the W8961ND supports only WPA/WPA2 wifi security in WDS mode as shown whereas the TG582n reportedly supports WEP only in WDS mode (I'll check and update later)!To resolve this one might:- use a LAN cable if possible and use either one of the routers as an Access Point- replace one of the routers with a similar make and model one. Punch these commands in.connection unbind application ESPconnection unbind application AHsaveallI then had to restart the router for the changes to take effect.Thanks again for the helpSkips'Regards,Ahmed. My L2TP VPN is up and running very nicely now.Just one thing, if anyone is having the same issues. A MASSIVE help.I also had that in my setup file when i took a look and it seems that unbinding applications ESP and AH has solved the problem. Hello!Perhaps might help if you are having the same problems!' Hi.Thanks for your suggestions.
I would recommend the Sky Sagem 2504n if you can find it (I can help getting it as well if needed) as it has a very advanced chipset and once unlocked with custom firmware provides graphing tools and tweaking options this helps!Regards,Ahmed.
But any broadcom router that allows telnet access and has xdslctl or adslctl binary that allows saving profiles should work. Yes some routers do allow SNR Margin Tweaking so one may increase Target SNR Margins while sacrificing some speed! For PTCL, I have used the W150D model that supports such feature: though I had installed Micronet Taiwan's firmware for model SP3367NL on it.